How to Choose a Dirt Bike Tire: Size, Tread & Fit

Eden Brown
Published November 13, 2026

To choose the right dirt bike tire, start with the complete markings on the tire you are replacing—not just the wheel diameter. Record the front and rear sizes separately, then match the tire’s intended terrain, rim fit, tube type, and clearance. Our EU product pages list the wheel diameter pairs for the IN 10 and IN 10 Pro, but not a complete replacement tire-and-tube size, so confirm the full fitment before ordering.

Yozma IN 10 electric dirt bike with knobby tires on a dirt trail

How to Read a Dirt Bike Tire Size

A marking such as 80/100-12 is a size example, not a Yozma fitment. In this format, 80 is the nominal tire width in millimetres, 100 describes the sidewall height as a percentage of the width, and 12 is the rim diameter in inches. The marking does not tell you whether the tire is approved for the front or rear wheel. Look for any front/rear designation, rotation arrow, load or speed rating, and TT (tube type) or TL (tubeless) marking.

Tyre size 80/100-12 explained: 80 mm nominal width, 100% aspect ratio and 12-inch rim diameter. Illustrative only, not confirmed IN 10 fitment.

The rim diameter is only one part of fit. Tires with the same size marking can differ in casing, approved rim-width range, tread, and mounted dimensions. Before shopping, photograph the full sidewall on both original tires and note which wheel each came from. If a marking is worn or hidden, check the exact model’s documentation or ask us to confirm the fitment rather than copying a size from another bike.

Match the Tread to the Ground You Ride Most

Choose for the ground that makes up most of your regular riding, then account for occasional sections that may require a compromise. A tire maker’s application notes for the exact model are more useful than judging a tread by how aggressive its knobs look.

Typical ground What to check in the tire description How to choose
Loose soil or sand Whether the maker lists the tire for soft terrain and describes its knob layout for loose ground. Choose a soft-terrain option when loose ground dominates your rides; do not select one just for a brief sandy section.
Wet, soft mud Whether the tire is specifically intended for mud and whether its tread is described as clearing soft material. Prioritise a mud application if those conditions are frequent. For mostly dry, firm trails, compare an intermediate option too.
Hardpack, gravel, or rocky ground The maker’s intended terrain, casing guidance, and any notes about the surfaces and impacts the tire is designed for. Choose a tire listed for firm ground you ride most, and inspect it for cuts or damaged knobs after rocky rides.
Mixed local trails An intermediate or mixed-terrain application available in the correct size and wheel position. Prioritise your most common surface and accept that one tire may not be ideal on every section.

For a route that is mostly dry, packed dirt with a few sandy corners, compare intermediate-terrain tires before choosing a sand-specific pattern. Tread pattern, rubber compound, and casing construction are separate characteristics; check the specific tire maker’s description instead of assuming a terrain label tells you everything.

Check Rim, Inner Tube, and Tire Clearance

Before ordering, confirm that the tire is approved for your rim width and intended wheel position. If the setup uses an inner tube, the tube’s size range and valve must match the tire and rim. A tire marked TL does not make a tube-type wheel tubeless; the rim must also be designed for a tubeless setup.

Keeping the original size is usually the clearest replacement path. If you want a different width or profile, check clearance at the chain, chain guide, swingarm, and fender; at the front, also check the fork and fender. A tire that clears while the bike is stationary may rub when the suspension moves. If you cannot verify the fit, stay with the documented specification and contact a qualified motorcycle tire shop or our support team before changing sizes.

During a tire change, inspect the tube (if fitted), rim band, valve, rim, and spokes. Replace damaged parts before riding. Our electric dirt bike maintenance guide covers regular tire and wheel checks as part of a broader pre-ride routine.

Yozma IN 10 and IN 10 Pro: Confirm the Full Tire Size

Our EU product pages publish wheel diameter pairs, which help identify each bike’s layout but are not complete tire or inner-tube specifications. The front and rear sizes must still be checked separately.

Model Published wheel diameters What to confirm before ordering a replacement
Yozma IN 10 14/12-inch wheel pair Full tire size, tube size and valve, front/rear designation, and clearance for any alternate size.
Yozma IN 10 Pro 17/14-inch wheel pair Full tire size, tube size and valve, front/rear designation, and clearance for any alternate size.

Because our public specifications list wheel diameter pairs rather than complete tire markings, do not order a replacement from “14/12” or “17/14” alone. Check the existing tire sidewalls and the model-specific information first. If you need help, send us the bike model and clear photos of both tire sidewalls, the wheel valves, and any tube markings through Yozma EU support. You can also compare both models in our IN 10 vs. IN 10 Pro guide or browse the Yozma electric dirt bike collection in Europe.

Set Pressure, Inspect Wear, and Check the First Ride

Check tire pressure when the tire is cold and use the setting specified for your exact bike, tire, and riding conditions. The maximum pressure moulded into a tire’s sidewall is not automatically the recommended riding pressure. If your model documentation does not give a setting for the tire fitted to your bike, contact us before riding; do not borrow a PSI value from a different model or setup. The IN 10 and IN 10 Pro user manuals are available in our EU support section.

Before each ride, look for cuts, bulges, bead damage, missing or torn knobs, embedded objects, loose spokes, a bent rim, or air loss that returns after inflation. If damage or repeated pressure loss makes the tire’s condition uncertain, have it inspected before riding. After installation, check that the bead is evenly seated, the valve is straight, the wheel turns freely, and the tire clears nearby parts. Stop and inspect if it rubs or loses air on the first short ride.

Before You Order a Dirt Bike Tire

  • Record the exact bike model and take clear photos of both original tire sidewalls.
  • Match the complete tire size and front/rear position; do not rely on wheel diameter alone.
  • Confirm rim-width approval, TT/TL setup, inner-tube size and valve, tread application, and rotation direction.
  • If changing size, verify clearance and the correct cold-pressure guidance before riding.

Dirt Bike Tire FAQ

These quick answers cover common replacement and fitment questions.

How do I know what size dirt bike tire to buy?

Read the complete marking on the tire you are replacing and note whether it is the front or rear tire. Confirm the size against documentation for your exact bike; the wheel diameter by itself is not enough.

Can I use the same tire size on the front and rear?

Only if your bike and the tire maker approve that tire for both wheel positions and it fits each rim. Many dirt bikes use different front and rear sizes, so check both sidewalls separately.

Do dirt bike tires need an inner tube?

It depends on the tire and wheel. A TT tire is designed for a tube, while a TL tire is intended for a tubeless-compatible setup. A TL marking alone does not confirm compatibility with your rim or tube; check the tire and wheel maker’s fitment guidance before installation.

What tire pressure should I use for off-road riding?

Use the cold-pressure recommendation for your exact bike and tire. Do not treat the sidewall maximum or another rider’s setting as your model’s recommendation; check the documentation or contact us if the correct value is not listed.

Why does a new dirt bike tire keep losing air?

On a tube-type wheel, inspect the tube for a puncture or pinch and check the valve and rim band. On a tubeless-compatible setup, check the tire, valve, and bead seal. Find and fix the cause before riding.

For a replacement, match the full front or rear tire marking first, then choose a tread intended for the ground you ride most. For an IN 10 or IN 10 Pro, confirm the complete tire and tube fitment before ordering—published wheel diameters alone do not provide that information.

About the Author

With over 15 years of experience wrenching on and riding everything with two wheels, Ricky lives and breathes dirt bikes. He grew up on the sound and smell of gas engines but has become a passionate advocate for the electric revolution, embracing the instant torque and low-maintenance fun they offer. Ricky combines his technical know-how with a love for teaching, breaking down complex topics into easy-to-understand advice. His mission is to help new riders and families confidently and safely enter the exciting world of off-road riding. When he's not writing, you'll find him exploring new trails or building backyard tracks with his kids.

Leave a comment

All comments are moderated before being published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.